10Micron Baader OMS-Nano Remote Switch The Baader OMS-Nano V2 is a network-operated remote switch for 10Micron mounts with Control Box V1/QCI or V2. It actuates the mount’s external on/off-switch input so an observatory operator can start or shut down the mount remotely.
Manufacturer model: 10Micron Baader OMS-Nano Remote Switch · Specifications checked against manufacturer data on 2026-11-04
The Baader OMS-Nano V2 is a network-operated remote switch for 10Micron mounts with Control Box V1/QCI or V2. It actuates the mount’s external on/off-switch input so an observatory operator can start or shut down the mount remotely.
Network operation
The module joins the local LAN and is accessed through its assigned IP address using a web browser. It is preconfigured for the supported 10Micron arrangement. USB is used for network configuration or firmware updates; normal operation uses the network cable.
Switch behaviour and controller version
The OMS-Nano sends a momentary signal for a few seconds rather than maintaining a permanent connection. The maker describes the EXT SWITCH jack contacts as parallel to the mount’s front rocker switch. This 2455031 V2 product must not be confused with the separate 2455032 OMS-Nano V3.
Supplied equipment
The manufacturer lists a 12 V power adapter, 1 m mount connection cable, 3 m LAN cable, 2 m USB cable and instructions. Published net weight is 0.21 kg. It is a remote switch interface, not a multi-outlet power-distribution controller.
Exact Baader 2455031 / OMS-Nano V2 identified. Supports V1/QCI and V2, rather than the separate V3 product. The momentary external-switch connection must not be represented as a permanent supply relay.
Additional specifications
Model version
OMS-Nano V2
Compatible control boxes
10Micron V1 (QCI) and V2; not the V3 version
Network interface
LAN/Ethernet; browser access by assigned IP
USB function
Network configuration and firmware updates
Switching behaviour
Momentary signal for a few seconds; not a permanent closed connection
Mount connection
Three-contact EXT SWITCH stereo jack; two front contacts in parallel with the rocker switch, without ground
Supply
Included 12 V power adapter
Mount connection cable length (m)
1
Lan cable length (m)
3
USB cable length (m)
2
Included equipment
OMS-Nano unit; power adapter; connection cable; LAN cable; USB cable; instructions
2455031
Datasheet
Artikelnummer fabrikant
2455031
Model
10Micron Baader OMS-Nano Remote Switch
Nettogewicht (kg)
0.21
Doel
Remote mount on/off-switch actuation
Specifieke referenties
MPN
2455031
Dit product gebruikt? Deel je ervaring met andere astronomen.
Commentaar (0)
Geen klantenbeoordelingen op het moment.
Uw beoordelingswaardering kan niet worden verzonden
Rapporteer reactie
Bent u zeker dat u deze opmerking wil rapporteren?
Melding verzonden
Uw opmerking is ingediend en zal door een beheerder worden behandeld.
Uw opmerking kan niet worden verzonden
Schrijf uw recensie
Beoordeling verstuurd
Uw beoordeling is toegevoegd en wordt beschikbaar zodra deze is goedgekeurd.
10Micron Baader OMS-Nano Remote Switch The Baader OMS-Nano V2 is a network-operated remote switch for 10Micron mounts with Control Box V1/QCI or V2. It actuates the mount’s external on/off-switch input so an observatory operator can start or shut down the mount remotely.
Manufacturer model: 10Micron Baader OMS-Nano Remote Switch · Specifications checked against manufacturer data on 2026-11-04
