QHY600 Pro I Mono SBFL The QHY600 Pro I Mono SBFL is a cooled monochrome astronomy camera using Sony IMX455. The scientific Pro I platform combines full-frame IMX455 imaging with dual 10 Gigabit fibre and USB 3.0 interfaces. This is the air-cooled SBFL Pro I configuration, with a 138 mm body and 14.5 mm backfocus. Camera Link belongs to Pro II and liquid…
Manufacturer model: QHY600 Pro I Mono SBFL · Specifications checked against manufacturer data on 2026-11-03
The QHY600 Pro I Mono SBFL is a cooled monochrome astronomy camera using Sony IMX455. The scientific Pro I platform combines full-frame IMX455 imaging with dual 10 Gigabit fibre and USB 3.0 interfaces. This is the air-cooled SBFL Pro I configuration, with a 138 mm body and 14.5 mm backfocus. Camera Link belongs to Pro II and liquid cooling belongs to LQ variants.
Sensor readout and image transfer
QHY’s published ADC specification is Native 16-bit (0-65535 greyscale) A/D. A 2 GB DDR3 image buffer supports downloads through USB 3.0; dual 10 Gigabit fibre. Monochrome capture supports separate luminance, RGB and narrowband filter exposures. Full-frame and region-of-interest rates depend on readout mode and output format; the table below preserves those conditions.
Cooling and dew control
Manufacturer cooling specification: Dual Stage TEC cooler: – Long exposures (> 1 second) Typically -35℃ below ambient – Short exposure (< 1second) high FPS, Typically -30℃ below ambient（Test temperature +20℃）. Cooling reduces thermal signal during long exposures, and performance depends on ambient conditions and capture rate. The camera has a protective-window heater and an internal humidity sensor.
Optical connections
The listed interface is 2-inch, M54, M48 or Nikon/Canon lens using the manufacturer-specified adapters, with backfocus of 14.5 mm, SBFL version. The short-backfocus body leaves additional room for filter wheels and adapter systems.
Power and software
Use an external 12 V supply before connecting the USB data cable. QHY’s operating guide specifies 11–13.8 V at the camera; cable voltage drop must be included in the power budget. QHY Pro operating guide specifies the official 12 V 6 A power adapter Install the matching QHY All-in-One driver/SDK and compatible capture software.
Use the named-model manufacturer connection diagram and the backfocus reference for the selected adapter. Readout mode and output format affect frame rate, noise and full-well capacity.
Additional specifications
Effective image area
36mm*24mm
Filter wheel interface
4PIN QHYCCD CFW Port
Trigger port
Programmable TrigOut, High Speed Sync Port / GPS interface Port
Support 2-inch, M54, M48, Nikon/Canon DSLR Lens, etc. (Combined with adapters )
Body length (mm)
138
Camera link
Not present on Pro I; manufacturer lists Camera Link for Pro II only
Cooling method
Air-cooled two-stage TEC; this is not the LQ liquid-cooled variant
Fibre capture
Compatible QHY PCIe frame-grabber hardware required for fibre capture
88213
Datasheet
ADC en uitgang
Native 16-bit (0-65535 greyscale) A/D
Antidauwverwarming
Available
Backfocus
14.5 mm, SBFL version
Kleurmodus
Monochrome
Computerinterface
USB 3.0; dual 10 Gigabit fibre
Besturingssoftware
QHY All-in-One drivers/SDK; compatible ASCOM and capture software such as NINA, SharpCap and EZCAP_QT
Koeling
Dual Stage TEC cooler: – Long exposures (＞ 1 second) Typically -35℃ below ambient – Short exposure (＜ 1second) high FPS, Typically -30℃ below ambient（Test temperature +20℃）
Photographic Mode ＞51ke- / ＞204ke- / ＞408ke- Extended Full Well Mode ＞80ke- / ＞320ke- / ＞720ke-
Beeldbuffer
2 GB DDR3
Model
QHY600 Pro I Mono SBFL
Optische aansluiting
2-inch, M54, M48 or Nikon/Canon lens using the manufacturer-specified adapters
Pixelgrootte
3.76μm*3.76μm
Voeding
40W/100% 20W/50% 13.8W/0%
Voedingsingang
12 V DC external supply; manufacturer guide specifies 11–13.8 V at the camera
Inschakelvolgorde
Connect 12 V power before USB; use a short, low-resistance power cable
Capaciteit voeding
QHY Pro operating guide specifies the official 12 V 6 A power adapter
Beschermvenster
AR+AR High Quality Multi-Layer Anti-Reflection Coating
Uitleesruis
Photography DSO Mode:1.9e- to 7.8e-(Gain0-100) High Gain Mode:1.1e- to 3.6e-(Gain0-100) Extend Fullwell Mode：5.4e- to 7.9e-（Gain0-100） Extend Fullwell Mode-2CMS：4.9e- to 5.9e-（Gain0-100）
Sensor
Sony IMX455
Sensorbelichting
BSI
Sluiter
Electronic Rolling Shutter
Totaal pixeloppervlak
9600*6422 (include optical black area and overscan area)
Gewicht
About 1kg
Dit product gebruikt? Deel je ervaring met andere astronomen.
Commentaar (0)
Geen klantenbeoordelingen op het moment.
Uw beoordelingswaardering kan niet worden verzonden
Rapporteer reactie
Bent u zeker dat u deze opmerking wil rapporteren?
Melding verzonden
Uw opmerking is ingediend en zal door een beheerder worden behandeld.
Uw opmerking kan niet worden verzonden
Schrijf uw recensie
Beoordeling verstuurd
Uw beoordeling is toegevoegd en wordt beschikbaar zodra deze is goedgekeurd.
QHY600 Pro I Mono SBFL The QHY600 Pro I Mono SBFL is a cooled monochrome astronomy camera using Sony IMX455. The scientific Pro I platform combines full-frame IMX455 imaging with dual 10 Gigabit fibre and USB 3.0 interfaces. This is the air-cooled SBFL Pro I configuration, with a 138 mm body and 14.5 mm backfocus. Camera Link belongs to Pro II and liquid…
Manufacturer model: QHY600 Pro I Mono SBFL · Specifications checked against manufacturer data on 2026-11-03
