ZWO ASI6200MC Pro | PixelSkiesAstro
search
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro

ZWO ASI6200MC Pro

€ 4.390,00
Inclusief belasting

ZWO ASI6200MC Pro P25 The ASI6200MC Pro is a cooled one-shot colour astronomy camera using the Sony IMX455 sensor. Its 36 × 24 mm imaging area records 9576 × 6388 pixels with 3.76 µm pixels and a native 16-bit ADC.

Manufacturer model: ZWO ASI6200MC Pro P25 · Specifications checked against manufacturer data on 2026-11-03

ZWO ASI6200MC Pro P25

The ASI6200MC Pro is a cooled one-shot colour astronomy camera using the Sony IMX455 sensor. Its 36 × 24 mm imaging area records 9576 × 6388 pixels with 3.76 µm pixels and a native 16-bit ADC.

Imaging performance

ZWO specifies 51,400 electrons full-well capacity, peak quantum efficiency of 80% and read noise of As low as 0.86 electrons. The listed capture rate is 6.3 fps advertised maximum (current P25 table); actual transfer speed depends on image size, ADC/output mode and USB connection. The colour sensor records colour in a single exposure sequence, supporting deep-sky imaging without separate RGB filter exposures.

Cooling and data transfer

Two-stage TEC cooling reduces thermal signal during long exposures. The manufacturer cooling specification is Two-stage TEC; 30–35 °C below ambient, tested at 30 °C ambient. A 512 MB DDR3 buffer and USB 3.0 connection support reliable downloads.

Connections and power

The camera connection is M54 × 0.75, with sensor spacing of 17.5 mm standard assembly. The protective window is 60 × 2 mm UV/IR-cut window. Use a 12 V DC, 3–5 A supply with a 5.5 × 2.1 mm centre-positive connector; the recommended battery range is 11–14 V. Include adapters and any filter wheel when calculating telescope backfocus.

ZWO manufacturer documentation

Compatibility notes

Use the exact named-model manufacturer connection and operating instructions linked with this product. Optional parts and adapters require their specified spacing and power limits.

Additional specifications

Buffer revision note512 MB current production; manufacturer states 256 MB before August 2023
Tilt adjustmentThree push-pull screw pairs
87025

Datasheet

ADC (bits)
16
Amp glow
Zero amp glow
Bereik accuspanning
11–14 V
Behuizingsdiameter (mm)
90
Buffer
512 MB DDR3
Cameraschroefdraad
M54 × 0.75
Kleurmodus
Colour
Koeling
Two-stage TEC; 30–35 °C below ambient, tested at 30 °C ambient
Belichtingsbereik
32 µs–2000 s
Full well (e⁻)
51400
HCG-gain
100
Interface
USB 3.0; USB 2.0 compatible
Maximale beeldsnelheid
6.3 fps advertised maximum (current P25 table)
Piek-QE (%)
80
Pixelgrootte (µm)
3.76
Voeding
12 V DC, 3–5 A recommended; 5.5 × 2.1 mm centre positive
Beschermvenster
60 × 2 mm UV/IR-cut window
Uitleesruis (e⁻)
As low as 0.86
Resolutie (px)
9576 × 6388
Sensor
Sony IMX455
Backfocus sensor
17.5 mm standard assembly
Sensordiagonaal (mm)
43.3
Sensorafmetingen (mm)
36 × 24
Sluiter
Rolling shutter
Software
Windows; Linux; macOS with compatible ZWO software/drivers
Gewicht (g)
700
Dit product gebruikt? Deel je ervaring met andere astronomen.
Commentaar (0)
Geen klantenbeoordelingen op het moment.