PlaneWave L-350 Direct Drive Mount | PixelSkiesAstro
search
  • PlaneWave L-350 Direct Drive Mount | PixelSkiesAstro

PlaneWave L-350 Direct Drive Mount

PlaneWave L-350 Direct Drive Mount The L-350 is PlaneWave's smallest L-Series direct-drive mount, carrying up to 45 kg. Direct-drive motors on both axes give zero backlash and zero periodic error with near-silent motion and slews of up to 50° per second, quick enough to track satellites. It installs in alt-azimuth or equatorial orientation and suits the…

Manufacturer model: PlaneWave L-350 (600549) · Specifications checked against manufacturer data on 2026-11-03

PlaneWave L-350 Direct Drive Mount

The L-350 is PlaneWave's smallest L-Series direct-drive mount, carrying up to 45 kg. Direct-drive motors on both axes give zero backlash and zero periodic error with near-silent motion and slews of up to 50° per second, quick enough to track satellites. It installs in alt-azimuth or equatorial orientation and suits the DeltaRho 350, CDK12.5, CDK14, IRDK12.5 and IRDK14.

Control

High-resolution encoders on each axis, home sensors and enclosed electronics are standard, with equipment cables routed through the mount. Control uses PlaneWave's PWI4 with integrated PointXP mount modelling, fully ASCOM compatible.

Mount

Type Alt-azimuth / equatorial direct-drive
Mount weight 50 kg (110 lb)
Maximum load 45 kg (100 lb)
Latitude range 0–90°, both hemispheres
Swing-through length 571.5 mm (22.5") from altitude axis
Motors Direct-drive 3-phase axial-flux torque motors
Motor torque About 20 ft-lb continuous; 50 ft-lb peak
Encoders 152 mm stainless steel ring, 18,880,000 counts/rev (0.069")
Slew rate 20°/s standard; 50°/s maximum
Power 100–240 V AC 50/60 Hz

Performance and software

Pointing accuracy <10" RMS with PointXP model
Pointing precision 2" at sidereal rate
Tracking accuracy 0.3" over 5 minutes at sidereal rate
Natural frequency 10 Hz or greater
Software PWI4 with PointXP; ASCOM

Standard manufacturer package

  • Keller EZ-Saddle 600182 (Losmandy D)
  • Six 3/8-16 cap screws and washers; shoulder bolt for EQ wedge alignment
  • 16 ft USB cable
  • Power cable and regulated power adapter
  • Allen key set

Manufacturer documentation

PlaneWave L-350 mount

Compatibility notes

Pier, EQ wedge (latitude-specific) and RA balance accessory sold separately. Supplied power adapter is 120 VAC IEC Type B.

Additional specifications

Load (kg)45
Latitude0-90 both hemispheres
Swing through (mm)571.5
Torque20 ft-lb cont; 50 peak
Pointing<10 arcsec RMS PointXP
Precision2 arcsec
Tracking0.3 arcsec / 5 min
Natural freq>=10 Hz
1321102

Data sheet

Encoders
152 mm, 18,880,000 cpr, 0.069 arcsec
Included
Keller EZ saddle, hardware, USB, power, Allen keys
Motors
3-phase axial-flux torque
Power
100-240 VAC 50/60 Hz
Slew
20 deg/s std; 50 max
Software
PWI4, PointXP, ASCOM
Type
Alt-az / EQ direct drive
Weight (kg)
50
Comments (0)
No customer reviews for the moment.