ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks
€ 99,00
Inclusief belasting
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks This pair of 102 mm CNC guide-scope rings provides adjustable support for a guide telescope with an outside tube diameter of 55–102 mm. Six adjustment points across the pair allow the guide telescope to be aligned relative to the main optical tube.
Manufacturer model: ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks · Specifications checked against manufacturer data on 2026-11-03
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks
This pair of 102 mm CNC guide-scope rings provides adjustable support for a guide telescope with an outside tube diameter of 55–102 mm. Six adjustment points across the pair allow the guide telescope to be aligned relative to the main optical tube.
Construction and mounting
The rings are made from aluminium. The manufacturer lists 270 g for the pair, expressed as two 135 g rings. The supplied riser blocks add 18 mm of height beneath the rings.
The manufacturer prose explicitly specifies 55 mm minimum and 102 mm maximum; the technical table transposes the min/max labels. The range follows the prose. Pair weight is published as 2 × 135 g.
Additional specifications
Alignment
Six-point adjustment across the ring pair
Pair weight (g)
270
Individual ring weight (g)
135
Riser block height (mm)
18
57813
Datasheet
Buitendiameter guidebuis
55–102 mm
Materiaal
Aluminium
Model
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks
Nominale ringmaat (mm)
102
Aantal
2
Dit product gebruikt? Deel je ervaring met andere astronomen.
Commentaar (0)
Geen klantenbeoordelingen op het moment.
Uw beoordelingswaardering kan niet worden verzonden
Rapporteer reactie
Bent u zeker dat u deze opmerking wil rapporteren?
Melding verzonden
Uw opmerking is ingediend en zal door een beheerder worden behandeld.
Uw opmerking kan niet worden verzonden
Schrijf uw recensie
Beoordeling verstuurd
Uw beoordeling is toegevoegd en wordt beschikbaar zodra deze is goedgekeurd.
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks This pair of 102 mm CNC guide-scope rings provides adjustable support for a guide telescope with an outside tube diameter of 55–102 mm. Six adjustment points across the pair allow the guide telescope to be aligned relative to the main optical tube.
Manufacturer model: ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks · Specifications checked against manufacturer data on 2026-11-03
