ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks
99,00 €
TTC
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks This pair of 102 mm CNC guide-scope rings provides adjustable support for a guide telescope with an outside tube diameter of 55–102 mm. Six adjustment points across the pair allow the guide telescope to be aligned relative to the main optical tube.
Manufacturer model: ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks · Specifications checked against manufacturer data on 2026-11-03
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks
This pair of 102 mm CNC guide-scope rings provides adjustable support for a guide telescope with an outside tube diameter of 55–102 mm. Six adjustment points across the pair allow the guide telescope to be aligned relative to the main optical tube.
Construction and mounting
The rings are made from aluminium. The manufacturer lists 270 g for the pair, expressed as two 135 g rings. The supplied riser blocks add 18 mm of height beneath the rings.
The manufacturer prose explicitly specifies 55 mm minimum and 102 mm maximum; the technical table transposes the min/max labels. The range follows the prose. Pair weight is published as 2 × 135 g.
Additional specifications
Alignment
Six-point adjustment across the ring pair
Pair weight (g)
270
Individual ring weight (g)
135
Riser block height (mm)
18
57813
Fiche technique
Diamètre extérieur de la lunette guide
55–102 mm
Matériau
Aluminium
Modèle
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks
Taille nominale du collier (mm)
102
Quantité
2
Vous utilisez ce produit ? Partagez votre expérience avec d'autres astronomes.
Commentaires (0)
Aucun avis n'a été publié pour le moment.
Votre avis ne peut pas être envoyé
Signaler le commentaire
Êtes-vous certain de vouloir signaler ce commentaire ?
Signalement envoyé
Votre signalement a bien été soumis et sera examiné par un modérateur.
Votre signalement ne peut pas être envoyé
Donnez votre avis
Avis envoyé
Votre commentaire a bien été enregistré. Il sera publié dès qu'un modérateur l'aura approuvé.
ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks This pair of 102 mm CNC guide-scope rings provides adjustable support for a guide telescope with an outside tube diameter of 55–102 mm. Six adjustment points across the pair allow the guide telescope to be aligned relative to the main optical tube.
Manufacturer model: ASToptics CNC Guide Scope Rings 102 mm with Riser Blocks · Specifications checked against manufacturer data on 2026-11-03
