ZWO ASI6200MC Pro | PixelSkiesAstro
search
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro
  • ZWO ASI6200MC Pro | PixelSkiesAstro

ZWO ASI6200MC Pro

ZWO ASI6200MC Pro P25 The ASI6200MC Pro is a cooled one-shot colour astronomy camera using the Sony IMX455 sensor. Its 36 × 24 mm imaging area records 9576 × 6388 pixels with 3.76 µm pixels and a native 16-bit ADC.

Manufacturer model: ZWO ASI6200MC Pro P25 · Specifications checked against manufacturer data on 2026-11-03

ZWO ASI6200MC Pro P25

The ASI6200MC Pro is a cooled one-shot colour astronomy camera using the Sony IMX455 sensor. Its 36 × 24 mm imaging area records 9576 × 6388 pixels with 3.76 µm pixels and a native 16-bit ADC.

Imaging performance

ZWO specifies 51,400 electrons full-well capacity, peak quantum efficiency of 80% and read noise of As low as 0.86 electrons. The listed capture rate is 6.3 fps advertised maximum (current P25 table); actual transfer speed depends on image size, ADC/output mode and USB connection. The colour sensor records colour in a single exposure sequence, supporting deep-sky imaging without separate RGB filter exposures.

Cooling and data transfer

Two-stage TEC cooling reduces thermal signal during long exposures. The manufacturer cooling specification is Two-stage TEC; 30–35 °C below ambient, tested at 30 °C ambient. A 512 MB DDR3 buffer and USB 3.0 connection support reliable downloads.

Connections and power

The camera connection is M54 × 0.75, with sensor spacing of 17.5 mm standard assembly. The protective window is 60 × 2 mm UV/IR-cut window. Use a 12 V DC, 3–5 A supply with a 5.5 × 2.1 mm centre-positive connector; the recommended battery range is 11–14 V. Include adapters and any filter wheel when calculating telescope backfocus.

ZWO manufacturer documentation

Compatibility notes

Use the exact named-model manufacturer connection and operating instructions linked with this product. Optional parts and adapters require their specified spacing and power limits.

Additional specifications

Buffer revision note512 MB current production; manufacturer states 256 MB before August 2023
Tilt adjustmentThree push-pull screw pairs
87025

Data sheet

ADC (bits)
16
Amp glow
Zero amp glow
Battery voltage range
11–14 V
Body diameter (mm)
90
Buffer
512 MB DDR3
Camera thread
M54 × 0.75
Colour mode
Colour
Cooling
Two-stage TEC; 30–35 °C below ambient, tested at 30 °C ambient
Exposure range
32 µs–2000 s
Full well (e⁻)
51400
Hcg gain
100
Interface
USB 3.0; USB 2.0 compatible
Maximum frame rate
6.3 fps advertised maximum (current P25 table)
Peak QE (%)
80
Pixel size (µm)
3.76
Power supply
12 V DC, 3–5 A recommended; 5.5 × 2.1 mm centre positive
Protective window
60 × 2 mm UV/IR-cut window
Read noise (e⁻)
As low as 0.86
Resolution (px)
9576 × 6388
Sensor
Sony IMX455
Sensor backfocus
17.5 mm standard assembly
Sensor diagonal (mm)
43.3
Sensor dimensions (mm)
36 × 24
Shutter
Rolling shutter
Software
Windows; Linux; macOS with compatible ZWO software/drivers
Weight (g)
700
Comments (0)
No customer reviews for the moment.