10Micron GM3000 HPS 10Micron GM3000 HPS is a German equatorial GoTo mount rated for 100 kg of instrumentation. The mount weighs 65 kg without accessories and uses absolute encoders mounted directly on the axes, brushless servo motors and a precision worm drive.
Manufacturer model: 10Micron GM3000 HPS · Specifications checked against manufacturer data on 2026-11-04
10Micron GM3000 HPS is a German equatorial GoTo mount rated for 100 kg of instrumentation. The mount weighs 65 kg without accessories and uses absolute encoders mounted directly on the axes, brushless servo motors and a precision worm drive.
Drive and mechanical construction
The published slew range is 2–12°/s. Its mechanical system uses 50 mm stainless-steel counterweight-shaft hardware, preloaded bearings and timing-belt reduction with automatic backlash recovery.
Pointing and tracking
The internal pointing model supports up to 100 alignment points and compensation for polar alignment, orthogonality, atmospheric refraction and system flexure. Manufacturer tracking examples refer to a modelled system; telescope rigidity, model quality and observing conditions still affect results.
Control and power
A heated, dimmable keypad provides standalone operation. Ethernet, Wi-Fi/web control and RS-232 support remote workflows, with separate GPS and ST-4 interfaces. The mount uses 24 V DC; power-supply and receiver connections must match the control-box generation.
Configuration and equipment
The native equatorial layout is intended for imaging and observing within the published latitude and meridian limits. Counterweights are sold separately. The technical table lists the standard package and separates operating temperature from storage limits.
Current model technical sheet and full catalogue specify 100 kg payload and a 12°/s maximum slew. A short product summary says 65 kg (the mount weight), while another paragraph says 20°/s; these contradictory prose figures are not used.
1453000
Technische Daten
Achsabmessungen
RA 80 mm; DEC 50 mm; alloy steel
Azimut-Feineinstellung
±10°
Basisdurchmesser laut Zeichnung (mm)
288
Lager
Preloaded tapered roller and roller-thrust bearings
Kabelführung
Internal through-axis routing
Kommunikationsanschlüsse
RS-232; GPS; ST-4 autoguide; Ethernet
Durchmesser der Gegengewichtsstange (mm)
50
Material der Gegengewichtsstange
Stainless steel
Gewicht der Gegengewichtsstange (kg)
8
Gegengewichte enthalten
No
Referenz Maßzeichnung
At 45°: side height 663 mm; front height 578 mm
Encoder
Absolute on-axis encoders; closed-loop HPS control
Instrumentenlast (kg)
100
Handsteuerbox
Metal housing; heated dimmable display and backlit keys; standalone operation
Breitengradbereich
20–70°
Stromwerte laut Hersteller
Approximately 1 A tracking; 3.5 A maximum slew; 5 A peak
Herstellerteilenummer
10M3000
Positioniergenauigkeit laut Hersteller
Less than 20 arcsec with 25-star model; model supports up to 100 points
Standard-Lieferumfang des Herstellers
GM3000 HPS Mount; Controlbox; Keypad; Counterweight shaft; Cables set; Allen wrenches; Shipping Kit; Includes the shipping wooden pallet-box and pier adapter.
Nachführbeispiel des Herstellers
Approximately 1 arcsec typical over 15 minutes; approximately 0.6 arcsec RMS with a 25-star model and flexure/polar-error compensation
Meridiangrenzen
±30° software; ±45° mechanical in RA
Modell
10Micron GM3000 HPS
Motoren
Two-axis AC brushless servo
Montierungstyp
German equatorial
Gewicht der Montierung ohne Zubehör (kg)
65
Objektdatenbank
Stellar and deep-sky catalogues; solar system objects, comets, asteroids and artificial satellites; user-defined targets
Pointing-Modell
Up to 100 alignment points; polar, orthogonality and refraction compensation
Fernsteuerung
Ethernet/Wi-Fi web interface, virtual keypad and compatible computer control
Schwenkgeschwindigkeitsbereich
2–12°/s
Standard-Betriebstemperatur
−15 to +35 °C
Lagertemperatur
−40 to +50 °C; not the operating range
Versorgungsspannung (V DC)
24
Nachführgeschwindigkeiten
Sidereal, solar, lunar and custom rates
Transmission
Timing-belt reduction with automatic backlash recovery
Schnecken
RA 32 mm; DEC 24 mm; tempered, ground and lapped alloy steel
Schneckenräder
RA: 315 teeth, 244 mm diameter; DEC: 250 teeth, 192 mm diameter; B14 bronze
10Micron GM3000 HPS 10Micron GM3000 HPS is a German equatorial GoTo mount rated for 100 kg of instrumentation. The mount weighs 65 kg without accessories and uses absolute encoders mounted directly on the axes, brushless servo motors and a precision worm drive.
Manufacturer model: 10Micron GM3000 HPS · Specifications checked against manufacturer data on 2026-11-04
