QHY183M The QHY183M is a cooled monochrome astronomy camera using SONY IMX183. The back-illuminated IMX183 sensor provides 20-megapixel capture with 2.4 µm pixels. QHY specifies 15.5 ke full well, read noise of 2.7 electrons at low gain and 1.0 electron at high gain. Its amplifier-glow reduction still requires appropriate calibration for long exposures.
Manufacturer model: QHY183M · Specifications checked against manufacturer data on 2026-11-03
The QHY183M is a cooled monochrome astronomy camera using SONY IMX183. The back-illuminated IMX183 sensor provides 20-megapixel capture with 2.4 µm pixels. QHY specifies 15.5 ke full well, read noise of 2.7 electrons at low gain and 1.0 electron at high gain. Its amplifier-glow reduction still requires appropriate calibration for long exposures.
Sensor readout and image transfer
QHY’s published ADC specification is 12bit (output as 16bit and 8bit). A 128MB DDR2 Buffer image buffer supports downloads through USB3.0. Monochrome capture supports separate luminance, RGB and narrowband filter exposures. Full-frame and region-of-interest rates depend on readout mode and output format; the table below preserves those conditions.
Cooling and dew control
Manufacturer cooling specification: Dual Stage TEC cooler (-40℃ below ambient, test temperature +20℃）. Cooling reduces thermal signal during long exposures, and performance depends on ambient conditions and capture rate. The camera has the manufacturer-listed dew-control provisions shown in the table.
Optical connections
The listed interface is M42/0.75, with backfocus of 17.5mm（±0.2）. Add the optical contribution of the selected adapters, filter wheel and guider when planning the telescope connection.
Power and software
Use an external 12 V supply before connecting the USB data cable. QHY’s operating guide specifies 11–13.8 V at the camera; cable voltage drop must be included in the power budget. Use the manufacturer-specified power adapter. Install the matching QHY All-in-One driver/SDK and compatible capture software.
Use the named-model manufacturer connection diagram and the backfocus reference for the selected adapter. Readout mode and output format affect frame rate, noise and full-well capacity.
Additional specifications
Effective pixel array
5544*3684
Full well
15.5ke-
61840
Technische Daten
ADC und Ausgang
12bit (output as 16bit and 8bit)
Verstärkerglühen
Amplifier Glow Can be reduced during long exposure
Antitau-Heizung
Available
Backfokus
17.5mm（±0.2）
Farbmodus
Monochrome
Computerschnittstelle
USB3.0
Steuerungssoftware
QHY All-in-One drivers/SDK; compatible ASCOM and capture software such as NINA, SharpCap and EZCAP_QT
Kühlung
Dual Stage TEC cooler (-40℃ below ambient, test temperature +20℃）
Dunkelstrom
0.0024e-/pixel/sec @ -15℃
Effektive Pixel
20 Megapixels
Belichtungszeitbereich
50us-3600sec
Bildraten
Full Resolution: 19FPS@8BIT 7.5FPS@12BIT ROI:; 4096*2160 4K HD Video 31FPS@8BIT 12FPS@12BIT; 1920*1080 HD Video 60FPS@8BIT 24FPS@12BIT; 800*600 SVGA 106FPS@8BIT 42FPS@12BIT; 640*480 VGA 130FPS@8BIT 53FPS@12BIT
Bildspeicher
128MB DDR2 Buffer
Modell
QHY183M
Optischer Anschluss
M42/0.75
Pixelgröße
2.4μm*2.4μm
Stromeingang
12 V DC external supply; manufacturer guide specifies 11–13.8 V at the camera
Einschaltreihenfolge
Connect 12 V power before USB; use a short, low-resistance power cable
Schutzfenster
AR+AR multi-layer anti-reflection glass
Ausleserauschen
2.7e-@lowest gain; 1.0e-@high gain
Sensor
SONY IMX183
Sensorbelichtung
BSI
Sensorgröße
Typical 1 inch (13.3mm*8.87mm)
Verschluss
Electric Rolling Shutter
Unity Gain
10
Gewicht
650g
Sie nutzen dieses Produkt? Teilen Sie Ihre Erfahrung mit anderen Astronomen.
Kommentare (0)
Aktuell keine Kunden-Kommentare
Ihre Bewertung der Rezension kann nicht gesendet werden
Kommentar melden
Möchten Sie diesen Kommentar wirklich melden?
Meldung gesendet
Ihre Meldung wurde übermittelt und wird durch einen Moderator geprüft.
Ihre Meldung kann nicht gesendet werden
Eigenen Kommentar verfassen
Bewertung gesendet
Ihr Kommentar wurde gespeichert und wird sofort nach Freigabe durch einen Moderator angezeigt.
QHY183M The QHY183M is a cooled monochrome astronomy camera using SONY IMX183. The back-illuminated IMX183 sensor provides 20-megapixel capture with 2.4 µm pixels. QHY specifies 15.5 ke full well, read noise of 2.7 electrons at low gain and 1.0 electron at high gain. Its amplifier-glow reduction still requires appropriate calibration for long exposures.
Manufacturer model: QHY183M · Specifications checked against manufacturer data on 2026-11-03
