ZWO ASI992MM Pro SWIR | PixelSkiesAstro
search
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro
  • ZWO ASI992MM Pro SWIR | PixelSkiesAstro

ZWO ASI992MM Pro SWIR

18.590,00 €
Tasse incluse

ZWO ASI992MM Pro SWIR The ASI992MM Pro is a cooled monochrome short-wave infrared camera using Sony’s InGaAs IMX992 sensor. Its 0.4–1.7 µm spectral range extends beyond ordinary visible-light astronomy cameras into SWIR.

Manufacturer model: ZWO ASI992MM Pro SWIR · Specifications checked against manufacturer data on 2026-11-03

ZWO ASI992MM Pro SWIR

The ASI992MM Pro is a cooled monochrome short-wave infrared camera using Sony’s InGaAs IMX992 sensor. Its 0.4–1.7 µm spectral range extends beyond ordinary visible-light astronomy cameras into SWIR.

Sensor and sensitivity

The 8.942 × 7.093 mm sensor records 2592 × 2056 pixels with 3.45 µm pixels and a 12-bit ADC. ZWO lists 62.8 ke full well, 71-electron read noise, up to 70 fps and estimated peak QE above 80% at 1200 nm. These are ASI992 figures, distinct from the lower-resolution ASI990 and ASI991 models.

Cooling and transfer

Two-stage TEC cooling is specified at 35–40 °C below ambient in ZWO’s 30 °C test conditions. Zero amp-glow circuitry, a 256 MB DDR3 buffer and USB 3.0 connection support image capture.

Power and optical connection

Use a 12 V DC, 3–5 A supply with a 5.5 × 2.1 mm centre-positive connector, or an 11–14 V battery. The M42 × 0.75 connection provides 6.5 mm bare sensor spacing, or 17.5 mm with the 11 mm ring. Select optics and filters with transmission appropriate to the intended SWIR wavelength range.

ZWO manufacturer documentation

Compatibility notes

Use the exact named-model manufacturer connection and operating instructions linked with this product. Optional parts and adapters require their specified spacing and power limits.

Additional specifications

Spectral range0.4–1.7 µm
87829

Scheda tecnica

ADC (bit)
12
Amp glow
Zero amp glow
Intervallo di tensione batteria
11–14 V
Buffer
256 MB DDR3
Filettatura camera
M42 × 0.75
Modalità colore
Monochrome
Raffreddamento
Two-stage TEC; 35–40 °C below ambient, tested at 30 °C ambient
Full well (e⁻)
62800
Interfaccia
USB 3.0; USB 2.0 hub
Frequenza massima dei fotogrammi
70 fps advertised maximum
QE massima
Over 80% at 1200 nm (manufacturer estimate)
Dimensione pixel (µm)
3.45
Alimentatore
12 V DC, 3–5 A; 5.5 × 2.1 mm centre positive
Rumore di lettura (e⁻)
71
Risoluzione (px)
2592 × 2056
Sensore
Sony IMX992 InGaAs
Back focus del sensore
6.5 mm bare; 17.5 mm with 11 mm ring
Dimensioni del sensore (mm)
8.942 × 7.093
Hai usato questo prodotto? Condividi la tua esperienza con altri astronomi.
Commenti (0)
Ancora nessuna recensione da parte degli utenti.