PegasusAstro USB Control Hub The USB Control Hub provides six powered USB 3.1 Gen1 ports for a telescope setup. Each port can have both data and power switched independently through software, allowing a connected device to be power-cycled without removing its cable.
Manufacturer model: PegasusAstro USB Control Hub · Specifications checked against manufacturer data on 2026-11-03
The USB Control Hub provides six powered USB 3.1 Gen1 ports for a telescope setup. Each port can have both data and power switched independently through software, allowing a connected device to be power-cycled without removing its cable.
Data and power capacity
The specified SuperSpeed rate is up to 5 Gbps, with USB2 and USB1 compatibility. Each port can provide up to 2.5 A, subject to the 8 A total USB-current limit. The hub requires 12–14 V DC; the supply capacity should match the connected equipment.
Outdoor operating range
Pegasus specifies −40 to +85 °C operation, a blue-anodised 6061 aluminium enclosure, input-voltage protection and port current limiting. Dimensions are 100 × 72 × 24 mm and mass is 200 g.
Software and connection
Unity, ASCOM Switch and INDI support port control. A 1.5 m USB3 Type-A to Type-B host lead is included. This is the original six-port USB Control Hub, not the later v2 model.
Gen1 5 Gbps rating follows the technical table. Webpage marketing also mentions Gen2; no 10 Gbps rate is claimed. Per-port current remains subject to the 8 A total USB budget.
Additional specifications
Downstream ports
6
Port control
Individual ON/OFF of data and power
Per port current (A)
2.5
Maximum total USB current (A)
8
Power supply capacity guidance
2–10 A according to attached loads
Expansion
RJ12 EXT
65166
Fiche technique
Dimensions (mm)
100 × 72 × 24
Boîtier
Blue-anodised 6061 aluminium; manufacturer ±5 kV ESD enclosure test
Modèle
PegasusAstro USB Control Hub
Température de fonctionnement
−40 to +85 °C
Pack
USB Control Hub; 1.5 m USB3 A-to-B lead
Entrée d'alimentation
12–14 V DC
Protection
Input reverse polarity; under/overvoltage; port current limiting
Logiciel
Unity; ASCOM Switch; INDI; Windows/macOS control applications
Norme USB
USB 3.1 Gen1; up to 5 Gbps; USB2/USB1 compatible
Poids (g)
200
Vous utilisez ce produit ? Partagez votre expérience avec d'autres astronomes.
Commentaires (0)
Aucun avis n'a été publié pour le moment.
Votre avis ne peut pas être envoyé
Signaler le commentaire
Êtes-vous certain de vouloir signaler ce commentaire ?
Signalement envoyé
Votre signalement a bien été soumis et sera examiné par un modérateur.
Votre signalement ne peut pas être envoyé
Donnez votre avis
Avis envoyé
Votre commentaire a bien été enregistré. Il sera publié dès qu'un modérateur l'aura approuvé.
PegasusAstro USB Control Hub The USB Control Hub provides six powered USB 3.1 Gen1 ports for a telescope setup. Each port can have both data and power switched independently through software, allowing a connected device to be power-cycled without removing its cable.
Manufacturer model: PegasusAstro USB Control Hub · Specifications checked against manufacturer data on 2026-11-03
