PegasusAstro Motor Focus Kit v2 SCT C11 This legacy v2 kit motorises the primary-mirror focusing mechanism of a Celestron C11 SCT. Its geared stepper motor drives the focuser through a timing belt, allowing the motor to sit away from equipment behind the telescope.
Manufacturer model: Motor Focus Kit v2 SCT C11 · Specifications checked against manufacturer data on 2026-11-04
This legacy v2 kit motorises the primary-mirror focusing mechanism of a Celestron C11 SCT. Its geared stepper motor drives the focuser through a timing belt, allowing the motor to sit away from equipment behind the telescope.
The motor uses 120:1 reduction with a nominal output step of 0.0625°. Published ratings are 12 V DC and 0.27 A. The motor, SCT adapter, pulley and belt together weigh 300 g.
This version uses a 22 mm pulley bore and M3 × 30 mm telescope fixing bolts. The kit contains the motor, anodised aluminium bracket, belt, pulley and bolts. Adjust the bracket position to tension the belt as described in the installation guide.
A separate compatible stepper controller is required. The motor connects through RJ45; it has no built-in USB controller. The installation guide lists DMFC, Ultimate Powerbox v1/v2 and eXternal Motor Controller. Cable inclusion differs between published package descriptions.
Manufacturer installation guide
Exact Nimax 63048 matched to legacy PEG-MFKv2-SCT11; Zero replacement motor specifications are excluded. Kit uses a 22 mm pulley bore and M3 × 30 mm telescope bolts. Manufacturer guide lists an RJ45 lead, while the supplier says an additional lead is required: cable inclusion is not promised. Bracket colours vary across seller revisions/photos; no fixed colour is asserted. Supplier selector also labels C11 & C14, but the C14-specific kit uses different bolts; this record retains the C11 configuration. RASA 11 compatibility depends on its focuser/revision and any retrofit; no blanket RASA approval is given. Unpublished enclosure dimensions are not inferred.
| Product family | Legacy SCT Motor Focus Kit |
|---|---|
| Drive arrangement | Motor pulley; focuser pulley; timing belt |
| Bracket | Four elongated adjustment holes for belt tension; three telescope attachment screws |
| Motor cable | Straight RJ45-to-RJ45 |
| Documented controller family | Dual Motor Focus Controller; Ultimate Powerbox v1/v2; eXternal Motor Controller |
| Supplier reference | 63048 |
| Motor type | Geared stepper motor |
| Motor step angle (°) | 7.5 |
| Gear reduction | 1:120 |
| Nominal output step angle (°) | 0.0625 |
| Motor phases | 4; unipolar |
| Voltage v DC | 12 |
| Rated current (A) | 0.27 |
| Kit mass (g) | 300 |
| Mass scope | Motor, SCT adapter, pulley and belt |
| Pulley bore (mm) | 22 |
| Telescope fixing screws | M3 × 30 mm |
| Timing belt | 2GT; 20 cm |
| Bracket material | Anodised aluminium |
| External controller required | Yes |
| Controller included | No |
| Box contents | Geared motor; SCT bracket; timing belt; model-specific pulley and bolts |
| Pull in rate pps | 400 |
| Pull in torque n (cm) | 60 at 100 pps |
Technische Daten
Besondere Bestellnummern
PegasusAstro Motor Focus Kit v2 SCT C11 This legacy v2 kit motorises the primary-mirror focusing mechanism of a Celestron C11 SCT. Its geared stepper motor drives the focuser through a timing belt, allowing the motor to sit away from equipment behind the telescope.
Manufacturer model: Motor Focus Kit v2 SCT C11 · Specifications checked against manufacturer data on 2026-11-04
