ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
search
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro
  • ZWO EAF N Electronic Automatic Focuser | PixelSkiesAstro

ZWO EAF N Electronic Automatic Focuser

ZWO EAF N Electronic Automatic Focuser The ZWO EAF N drives a telescope focuser with a compact stepper motor and 1:128 reduction. ZWO specifies a 5 kg payload and approximately 2.812 µm positioning per step under its stated setup; linear movement depends on the focuser mechanism.

Manufacturer model: ZWO EAF N Electronic Automatic Focuser · Specifications checked against manufacturer data on 2026-11-03

ZWO EAF N Electronic Automatic Focuser

The ZWO EAF N drives a telescope focuser with a compact stepper motor and 1:128 reduction. ZWO specifies a 5 kg payload and approximately 2.812 µm positioning per step under its stated setup; linear movement depends on the focuser mechanism.

Power and control

A USB Type-C connection supplies 5 V at 500 mA and carries wired control. This model has no integrated battery or Bluetooth. The increased motor power requirement means the original ASIAIR and ASIAIR Pro are not supported by ZWO’s stated USB compatibility guidance.

Software and accessories

The focuser supports ASIAIR, ASIStudio, ASCOM and INDI-compatible workflows. The 3.5 mm accessory connection accepts a compatible hand controller or temperature probe, available separately.

Compatibility and installation

Fit the correct bracket and flexible coupling to the focuser shaft. ZWO advises a 4 mm coupling for the listed Takahashi and Celestron C8/C11 configurations, rather than the 5 mm coupling. Set backlash, zero and travel limits before automated use.

ZWO manufacturer documentation

Compatibility notes

Use the exact named-model manufacturer connection and operating instructions linked with this product. Optional parts and adapters require their specified spacing and power limits.

Additional specifications

Step angle (°)7.5
Reduction ratio1:128
Manufacturer step resolutionApproximately 2.812 µm per step; depends on focuser installation
CommunicationUSB Type-C
USB power5 V, 500 mA
Accessory port3.5 mm temperature-probe / hand-controller interface
Coupling noteTakahashi and Celestron C8/C11 installations: use 4 mm coupling; manufacturer advises against 5 mm coupling
Asiair power compatibilityNot compatible with first-generation ASIAIR or ASIAIR Pro USB output capability; manufacturer recommends newer-generation ASIAIR
86542

Data sheet

Dimensions (mm)
41 × 52 × 70.3
Motor
Stepper motor
Mounting
Appropriate bracket and flexible coupling required
Payload (kg)
5
Software
ASIAIR app; ASIStudio; ASCOM; INDI and compatible software
Weight (g)
215
Comments (0)
No customer reviews for the moment.