QHY183C The QHY183C is a cooled one-shot colour astronomy camera using SONY IMX183. The back-illuminated IMX183 sensor provides 20-megapixel capture with 2.4 µm pixels. QHY specifies 15.5 ke full well, read noise of 2.7 electrons at low gain and 1.0 electron at high gain. Its amplifier-glow reduction still requires appropriate calibration for long exposures.
Manufacturer model: QHY183C · Specifications checked against manufacturer data on 2026-11-03
The QHY183C is a cooled one-shot colour astronomy camera using SONY IMX183. The back-illuminated IMX183 sensor provides 20-megapixel capture with 2.4 µm pixels. QHY specifies 15.5 ke full well, read noise of 2.7 electrons at low gain and 1.0 electron at high gain. Its amplifier-glow reduction still requires appropriate calibration for long exposures.
Sensor readout and image transfer
QHY’s published ADC specification is 12bit (output as 16bit and 8bit). A 128MB DDR2 Buffer image buffer supports downloads through USB3.0. The colour sensor records colour in the same exposure sequence without separate RGB filter passes. Full-frame and region-of-interest rates depend on readout mode and output format; the table below preserves those conditions.
Cooling and dew control
Manufacturer cooling specification: Dual Stage TEC cooler (-40℃ below ambient, test temperature +20℃）. Cooling reduces thermal signal during long exposures, and performance depends on ambient conditions and capture rate. The camera has the manufacturer-listed dew-control provisions shown in the table.
Optical connections
The listed interface is M42/0.75, with backfocus of 17.5mm（±0.2）. Add the optical contribution of the selected adapters, filter wheel and guider when planning the telescope connection.
Power and software
Use an external 12 V supply before connecting the USB data cable. QHY’s operating guide specifies 11–13.8 V at the camera; cable voltage drop must be included in the power budget. Use the manufacturer-specified power adapter. Install the matching QHY All-in-One driver/SDK and compatible capture software.
Use the named-model manufacturer connection diagram and the backfocus reference for the selected adapter. Readout mode and output format affect frame rate, noise and full-well capacity.
Additional specifications
Effective pixel array
5544*3684
Full well
15.5ke-
54778
Datasheet
ADC en uitgang
12bit (output as 16bit and 8bit)
Versterkergloed
Amplifier Glow Can be reduced during long exposure
Antidauwverwarming
Available
Backfocus
17.5mm（±0.2）
Kleurmodus
Colour
Computerinterface
USB3.0
Besturingssoftware
QHY All-in-One drivers/SDK; compatible ASCOM and capture software such as NINA, SharpCap and EZCAP_QT
Koeling
Dual Stage TEC cooler (-40℃ below ambient, test temperature +20℃）
Donkerstroom
0.0024e-/pixel/sec @ -15℃
Effectieve pixels
20 Megapixels
Bereik belichtingstijd
50us-3600sec
Beeldsnelheden
Full Resolution: 19FPS@8BIT 7.5FPS@12BIT ROI:; 4096*2160 4K HD Video 31FPS@8BIT 12FPS@12BIT; 1920*1080 HD Video 60FPS@8BIT 24FPS@12BIT; 800*600 SVGA 106FPS@8BIT 42FPS@12BIT; 640*480 VGA 130FPS@8BIT 53FPS@12BIT
Beeldbuffer
128MB DDR2 Buffer
Model
QHY183C
Optische aansluiting
M42/0.75
Pixelgrootte
2.4μm*2.4μm
Voedingsingang
12 V DC external supply; manufacturer guide specifies 11–13.8 V at the camera
Inschakelvolgorde
Connect 12 V power before USB; use a short, low-resistance power cable
Beschermvenster
IR-cut filter
Uitleesruis
2.7e-@lowest gain; 1.0e-@high gain
Sensor
SONY IMX183
Sensorbelichting
BSI
Sensorgrootte
Typical 1 inch (13.3mm*8.87mm)
Sluiter
Electric Rolling Shutter
Unity gain
10
Gewicht
650g
Dit product gebruikt? Deel je ervaring met andere astronomen.
Commentaar (0)
Geen klantenbeoordelingen op het moment.
Uw beoordelingswaardering kan niet worden verzonden
Rapporteer reactie
Bent u zeker dat u deze opmerking wil rapporteren?
Melding verzonden
Uw opmerking is ingediend en zal door een beheerder worden behandeld.
Uw opmerking kan niet worden verzonden
Schrijf uw recensie
Beoordeling verstuurd
Uw beoordeling is toegevoegd en wordt beschikbaar zodra deze is goedgekeurd.
QHY183C The QHY183C is a cooled one-shot colour astronomy camera using SONY IMX183. The back-illuminated IMX183 sensor provides 20-megapixel capture with 2.4 µm pixels. QHY specifies 15.5 ke full well, read noise of 2.7 electrons at low gain and 1.0 electron at high gain. Its amplifier-glow reduction still requires appropriate calibration for long exposures.
Manufacturer model: QHY183C · Specifications checked against manufacturer data on 2026-11-03
