10Micron GM2000 HPS II COMBI ColdTemp 10Micron GM2000 HPS II COMBI ColdTemp combines the 50 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.
Manufacturer model: 10Micron GM2000 HPS II COMBI ColdTemp · Specifications checked against manufacturer data on 2026-11-04
10Micron GM2000 HPS II COMBI ColdTemp combines the 50 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.
Cold-temperature equipment
10Micron specifies operation down to −30 °C for this option, using special low-temperature lubricants, silicone-sheathed wiring and suitable electronics. This is an operating specification for the ColdTemp build, not the much lower storage-temperature figure. It does not certify every attached camera, cable or third-party accessory for the same conditions.
Mechanics and performance
The model retains the standard mechanical architecture, 33.5 kg mount weight without accessories, 40 mm counterweight shaft and 2–20°/s published slewing range. The onboard model supports up to 100 points and compensates polar, orthogonality, refraction and flexure errors.
Control and installation
The 24 V DC system supports keypad and compatible remote computer/web control. Counterweights are separate. Match the power supply and GPS receiver to the actual control-box generation, and use the model-specific technical sheet and support interface for installation.
Current manufacturer technical-sheet mass is 18.5 + 15 = 33.5 kg. Product prose rounds the first module to 18 kg. Standard operating range is separate from the ColdTemp option. The product-page Cold Temperature option explicitly states −30 °C; the technical-sheet “−30/−35” wording is not treated as an unconditional −35 °C guarantee.
Additional specifications
Transport modules (kg)
18.5 + 15
Model variant
Cold Temperature version
Cold temperature minimum (°C)
-30
Cold temperature measures
Special low-temperature lubricants, silicone-sheathed wiring and low-temperature electronics
1452030C
Scheda tecnica
Dimensioni degli assi
50 mm diameter; alloy steel
Regolazione fine in azimut
±10°
Diametro della base nel disegno (mm)
230
Cuscinetti
Preloaded tapered roller and roller-thrust bearings
Porte di comunicazione
RS-232; GPS; ST-4 autoguide; Ethernet
Diametro dell'asta contrappesi (mm)
40
Materiale dell'asta contrappesi
Stainless steel
Peso dell'asta contrappesi (kg)
4
Contrappesi inclusi
No
Riferimento disegno quotato
At 45°: side height 540 mm; front height 479 mm
Encoder
Absolute on-axis encoders; closed-loop HPS control
Carico strumentale (kg)
50
Pulsantiera
Metal housing; heated dimmable display and backlit keys; standalone operation
Intervallo di latitudine
20–70°
Consumi dichiarati dal produttore
Approximately 0.7 A tracking; 3 A maximum slew; 5 A peak
Codice produttore
10M2030
Precisione di puntamento dichiarata
Less than 20 arcsec with 25-star model; model supports up to 100 points
Dotazione standard del produttore
GM2000 HPS II Combi Mount; Controlbox; Keypad; Counterweight shaft; Cables set; Allen wrenches; Cardboard box
Esempio di inseguimento del produttore
Approximately 1 arcsec typical over 15 minutes; approximately 0.6 arcsec RMS with a 25-star model and flexure/polar-error compensation
Limiti del meridiano
±30° software; ±45° mechanical in RA
Modello
10Micron GM2000 HPS II COMBI ColdTemp
Motori
Two-axis AC brushless servo
Tipo di montatura
German equatorial
Peso della montatura senza accessori (kg)
33.5
Database di oggetti
Stellar and deep-sky catalogues; solar system objects, comets, asteroids and artificial satellites; user-defined targets
Temperatura di esercizio
−30 to +35 °C; ColdTemp configuration
Modello di puntamento
Up to 100 alignment points; polar, orthogonality and refraction compensation
Controllo remoto
Ethernet/Wi-Fi web interface, virtual keypad and compatible computer control
Intervallo di velocità di puntamento
2–20°/s
Temperatura di conservazione
−40 to +50 °C; not the operating range
Tensione di alimentazione (V CC)
24
Velocità di inseguimento
Sidereal, solar, lunar and custom rates
Trasmissione
Timing-belt reduction with automatic backlash recovery
10Micron GM2000 HPS II COMBI ColdTemp 10Micron GM2000 HPS II COMBI ColdTemp combines the 50 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.
Manufacturer model: 10Micron GM2000 HPS II COMBI ColdTemp · Specifications checked against manufacturer data on 2026-11-04
