10Micron GM4000 HPS II ColdTemp

Name: 10Micron GM4000 HPS II ColdTemp
Brand: 10Micron
SKU: 1454010C

10Micron GM4000 HPS II ColdTemp 10Micron GM4000 HPS II ColdTemp combines the 150 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.

Manufacturer model: 10Micron GM4000 HPS II ColdTemp · Specifications checked against manufacturer data on 2026-11-04

10Micron GM4000 HPS II ColdTemp

10Micron GM4000 HPS II ColdTemp combines the 150 kg instrument capacity of the standard mount with the manufacturer’s special low-temperature configuration. It is a German equatorial HPS mount with absolute on-axis encoders, precision worm gearing and two-axis brushless servo drive.

Cold-temperature equipment

10Micron specifies operation down to −30 °C for this option, using special low-temperature lubricants, silicone-sheathed wiring and suitable electronics. This is an operating specification for the ColdTemp build, not the much lower storage-temperature figure. It does not certify every attached camera, cable or third-party accessory for the same conditions.

Mechanics and performance

The model retains the standard mechanical architecture, 125 kg mount weight without accessories, 60 mm counterweight shaft and 2–8°/s published slewing range. The onboard model supports up to 100 points and compensates polar, orthogonality, refraction and flexure errors.

Control and installation

The 24 V DC system supports keypad and compatible remote computer/web control. Counterweights are separate. Match the power supply and GPS receiver to the actual control-box generation, and use the model-specific technical sheet and support interface for installation.

10Micron manufacturer documentation

10Micron model technical sheet

Compatibility notes

The current GM4000 technical sheet specifies 4 A maximum-slew and 5 A peak; older brochures give 5 A and 6 A. Current model technical-sheet values are selected. Its 60 mm internal cable passage is distinct from its 60 mm counterweight shaft. The product-page Cold Temperature option explicitly states −30 °C; the technical-sheet “−30/−35” wording is not treated as an unconditional −35 °C guarantee.

Additional specifications

Model variant	Cold Temperature version
Cold temperature minimum (°C)	-30
Cold temperature measures	Special low-temperature lubricants, silicone-sheathed wiring and low-temperature electronics

Referencia 1454010C

Ficha técnica

Axis dimensions: RA 85 mm; DEC 80 mm; alloy steel
Azimuth fine adjustment: ±10°
Base diameter in family drawing (mm): 360
Bearings: Preloaded tapered roller and roller-thrust bearings
Cable management: Internal through-axis routing; 60 mm passage
Communication ports: RS-232; GPS; ST-4 autoguide; Ethernet
Counterweight shaft diameter (mm): 60
Counterweight shaft material: Stainless steel
Counterweight shaft weight (kg): 13
Counterweights included: No
Dimensional drawing reference: At 45°: side height 785 mm; front height 673 mm
Encoders: Absolute on-axis encoders; closed-loop HPS control
Instrument payload (kg): 150
Keypad: Metal housing; heated dimmable display and backlit keys; standalone operation
Latitude range: 20–70°
Manufacturer current figures: Approximately 1.5 A sidereal tracking; 4 A maximum slew; 5 A peak
Manufacturer part number: 10M4010
Manufacturer pointing accuracy: Less than 20 arcsec with 25-star model; model supports up to 100 points
Manufacturer standard package: GM4000 HPS II Mount; Controlbox; Keypad; Counterweight shaft; Cables set; Allen wrenches; Shipping Kit; Includes the shipping wooden pallet-box and pier adapter.
Manufacturer tracking example: Approximately 1 arcsec typical over 15 minutes; approximately 0.6 arcsec RMS with a 25-star model and flexure/polar-error compensation
Meridian limits: ±30° software; ±45° mechanical in RA
Model: 10Micron GM4000 HPS II ColdTemp
Motors: Two-axis AC brushless servo
Mount type: German equatorial
Mount weight without accessories (kg): 125
Object database: Stellar and deep-sky catalogues; solar system objects, comets, asteroids and artificial satellites; user-defined targets
Operating temperature: −30 to +35 °C; ColdTemp configuration
Pointing model: Up to 100 alignment points; polar, orthogonality and refraction compensation
Remote control: Ethernet/Wi-Fi web interface, virtual keypad and compatible computer control
Slew speed range: 2–8°/s
Storage temperature: −40 to +50 °C; not the operating range
Supply voltage v DC: 24
Tracking rates: Sidereal, solar, lunar and custom rates
Transmission: Timing-belt reduction with automatic backlash recovery
Worm screws: 32 mm; tempered, ground and lapped alloy steel
Worm wheels: RA: 430 teeth, 330 mm diameter; DEC: 315 teeth, 244 mm diameter; B14 bronze