10Micron GM1000 HPS EP

Name: 10Micron GM1000 HPS EP
Brand: 10Micron
SKU: 1451002

10Micron GM1000 HPS EP 10Micron GM1000 HPS EP is a German equatorial GoTo mount rated for 30 kg of instrumentation. The mount weighs 19.5 kg without accessories and uses absolute encoders mounted directly on the axes, brushless servo motors and a precision worm drive.

Manufacturer model: 10Micron GM1000 HPS EP · Specifications checked against manufacturer data on 2026-11-04

10Micron GM1000 HPS EP

10Micron GM1000 HPS EP is a German equatorial GoTo mount rated for 30 kg of instrumentation. The mount weighs 19.5 kg without accessories and uses absolute encoders mounted directly on the axes, brushless servo motors and a precision worm drive.

Drive and mechanical construction

The published slew range is 2–15°/s. Its mechanical system uses 30 mm stainless-steel counterweight-shaft hardware, preloaded bearings and timing-belt reduction with automatic backlash recovery.

Pointing and tracking

The internal pointing model supports up to 100 alignment points and compensation for polar alignment, orthogonality, atmospheric refraction and system flexure. Manufacturer tracking examples refer to a modelled system; telescope rigidity, model quality and observing conditions still affect results.

Control and power

A heated, dimmable keypad provides standalone operation. Ethernet, Wi-Fi/web control and RS-232 support remote workflows, with separate GPS and ST-4 interfaces. The mount uses 24 V DC; power-supply and receiver connections must match the control-box generation.

Configuration and equipment

The native equatorial layout is intended for imaging and observing within the published latitude and meridian limits. Counterweights are sold separately. The technical table lists the standard package and separates operating temperature from storage limits.

10Micron manufacturer documentation

10Micron model technical sheet

10Micron dimensional drawing

Compatibility notes

The EP is the 30 kg Enhanced Performance version, not the original 25 kg GM1000. The shaft extension is listed by the manufacturer as necessary at maximum payload. Accuracy figures are conditional manufacturer examples, not guarantees for every telescope.

Additional specifications

Included shaft extension	Included; required for balancing at maximum payload

Referencia 1451002

Ficha técnica

Axis dimensions: RA 32 mm; DEC 30 mm; reinforced alloy-steel axes
Azimuth fine adjustment: ±7.5°
Base diameter in family drawing (mm): 160
Bearings: Preloaded tapered roller and roller-thrust bearings
Communication ports: RS-232; GPS; ST-4 autoguide; Ethernet
Counterweight shaft diameter (mm): 30
Counterweight shaft material: Stainless steel
Counterweight shaft weight (kg): 1.7
Counterweights included: No
Dimensional drawing reference: GM1000 family illustration at 45°: side height 462 mm; front height 406 mm; EP-specific installation dimensions are not separately identified
Encoders: Absolute on-axis encoders; closed-loop HPS control
Instrument payload (kg): 30
Keypad: Metal housing; heated dimmable display and backlit keys; standalone operation
Latitude range: 0–82°; 90° optional
Manufacturer current figures: Approximately 0.5 A tracking; 3 A maximum slew; 4 A peak
Manufacturer part number: 10M1030
Manufacturer pointing accuracy: Less than 20 arcsec with 25-star model; model supports up to 100 points
Manufacturer standard package: GM1000 HPS EP Mount; Controlbox; Keypad; Counterweight shaft; Counterweight shaft-extension; Required to achieve balance at maximum payload.; Cables set; Allen wrenches; Cardboard box
Manufacturer tracking example: Approximately 1 arcsec typical over 15 minutes; approximately 0.6 arcsec RMS with a 25-star model and flexure/polar-error compensation
Meridian limits: ±30° software; ±45° mechanical in RA
Model: 10Micron GM1000 HPS EP
Motors: Two-axis AC brushless servo
Mount type: German equatorial
Mount weight without accessories (kg): 19.5
Object database: Stellar and deep-sky catalogues; solar system objects, comets, asteroids and artificial satellites; user-defined targets
Pointing model: Up to 100 alignment points; polar, orthogonality and refraction compensation
Remote control: Ethernet/Wi-Fi web interface, virtual keypad and compatible computer control
Slew speed range: 2–15°/s
Standard operating temperature: −15 to +35 °C
Storage temperature: −40 to +50 °C; not the operating range
Supply voltage v DC: 24
Tracking rates: Sidereal, solar, lunar and custom rates
Transmission: Timing-belt reduction with automatic backlash recovery
Worm screws: 20 mm; tempered, ground and lapped alloy steel
Worm wheels: 250 teeth; 125 mm diameter; B14 bronze