QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
search
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro
  • QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel | PixelSkiesAstro

QHY CFW3M-US 7 × 36 mm Electronic Filter Wheel

QHY CFW3M-US The QHY CFW3M-US is a seven-position motorised filter wheel for 36 mm unmounted filters. A direct-drive motor takes the shortest route between positions, reducing unnecessary carousel movement.

Manufacturer model: QHY CFW3M-US · Specifications checked against manufacturer data on 2026-11-03

QHY CFW3M-US

The QHY CFW3M-US is a seven-position motorised filter wheel for 36 mm unmounted filters. A direct-drive motor takes the shortest route between positions, reducing unnecessary carousel movement.

Filter clearance and optical spacing

The published body backfocus contribution is 17 mm, with a further 2 mm legacy adapter contribution where that adapter is required. Newer compatible direct connections can omit it. The usable filter-height limit is 5.5 mm; clearance must still be left for rotation. Weight is Approximately 700 g.

Two control arrangements

Use either the QHY camera-control connection or USB-control mode. The QHY 4-pin cable carries both power and commands. In USB mode the wheel can require 780 mA, beyond the 500 mA limit of some USB 2.0 ports; QHY documents auxiliary 12 V power through a 12 V-to-RJ11 cable for that case.

Installation and software

Do not connect USB while operating through the camera-control cable. Select the corresponding ASCOM driver and interface mode. Use plastic gaskets or the manufacturer’s filter masks to retain unmounted glass without pressing metal directly against the filter. The reset button returns the carousel to position 1.

QHYCCD manufacturer documentation

Compatibility notes

Use the named-model manufacturer connection diagram and the backfocus reference for the selected adapter. Readout mode and output format affect frame rate, noise and full-well capacity.

Additional specifications

Body backfocus (mm)17
Legacy adapter backfocus (mm)2
Usable filter height limit (mm)5.5
Control optionsUSB control or QHY 4-pin camera control
Camera control power12 V carried by QHY 4-pin cable; no separate supply in this mode
USB current requirement ma780
Auxiliary power12 V-to-RJ11 cable can supply power in USB-control mode where USB current is insufficient
Connection restrictionDo not connect USB while using the camera-control cable
Status indicatorColour-coded filter-position LED; USB/4-pin mode indication
ResetReturns carousel to initial position, slot 1
Recommended camerasQHY163M; QHY294M; QHY268M
Filter retentionUse plastic gaskets between screws and unmounted filter glass; manufacturer supplies filter masks for M/L/XL from September 2023
DriverSelect matching ASCOM USB or camera-serial control driver
Backfocus referenceAdapter contribution is a spacing increment, not necessarily physical adapter thickness; newer direct camera connections can omit the legacy adapter
64033

Ficha técnica

Drive
Direct drive; reverses to shortest path between positions
Filter positions
7
Model
QHY CFW3M-US
Supported filters
36 mm unmounted
Weight (g)
Approximately 700
Comentarios (0)
No hay reseñas de clientes en este momento.