Baader H-alpha CMOS f/2 Highspeed 1.25" This 1.25-inch H-alpha filter is the 6.5 nm f/2 Highspeed version from Baader’s CMOS-optimised Precision Grade range. It isolates the H-alpha emission band for narrowband imaging, with the manufacturer’s wavelength reference at 656.3 nm.
Manufacturer model: Baader H-alpha CMOS f/2 Highspeed 1.25" · Specifications checked against manufacturer data on 2026-11-04
This 1.25-inch H-alpha filter is the 6.5 nm f/2 Highspeed version from Baader’s CMOS-optimised Precision Grade range. It isolates the H-alpha emission band for narrowband imaging, with the manufacturer’s wavelength reference at 656.3 nm.
Fast optical systems
The filter’s bandpass is designed for the incidence angles found in very fast optics, including f/2 Celestron RASA systems. Baader recommends this family for f/3.4 and faster optical systems. It is distinct from the standard slower-system narrowband filters and the narrower Ultra-Highspeed family.
Glass, cell and coatings
The filter uses 2 mm glass in a 5.5 mm ULP mounted cell. Reflex-Blocker hard coatings, plane-optical polishing, sealed coating edges and blackened edges are specified. The outer-rim indicator marks the telescope-facing side.
Imaging configuration
This is one filter, rather than an H-alpha/O-III/S-II set. The coating generation is optimised for CMOS cameras and is also suitable for CCD imaging. Use a holder that accepts the stated filter format and cell height.
Exact manufacturer f/2 Highspeed 6.5 nm SKU matched by band and mounted size. Not the 3.5/4 nm Ultra-Highspeed model. Wavelength follows the exact manufacturer variant table, including S-II at 671.7 nm; no alternative line-centre value is silently substituted.
70907
Technische Daten
Anwendung
Imaging with CMOS or CCD cameras
Vergütung
Reflex-Blocker hard coating; Life-Coat sealed edges
EAN-Barcode
4047825047052
Kantenbehandlung
Blackened edges; telescope-facing black outer-rim indicator
Emissionsband
H-alpha
Filterserie
f/2 Highspeed, Precision Grade; CMOS-optimised
Filterformat
1.25-inch
FWHM (nm)
6.5
Glasdicke (mm)
2
Nettogewicht laut Hersteller (kg)
0.01
Herstellerteilenummer
2961150
Wellenlänge laut Hersteller (nm)
656.3
Modell
Baader H-alpha CMOS f/2 Highspeed 1.25"
Montage
Mounted, 5.5 mm ULP cell
Menge
1
Empfohlene Öffnungsverhältnisse
f/3.4 and faster
Form
Round
Oberflächenbeschaffenheit
Plane-optically polished
Besondere Bestellnummern
Hersteller-Teilenummer (MPN)
2961150
Sie nutzen dieses Produkt? Teilen Sie Ihre Erfahrung mit anderen Astronomen.
Kommentare (0)
Aktuell keine Kunden-Kommentare
Ihre Bewertung der Rezension kann nicht gesendet werden
Kommentar melden
Möchten Sie diesen Kommentar wirklich melden?
Meldung gesendet
Ihre Meldung wurde übermittelt und wird durch einen Moderator geprüft.
Ihre Meldung kann nicht gesendet werden
Eigenen Kommentar verfassen
Bewertung gesendet
Ihr Kommentar wurde gespeichert und wird sofort nach Freigabe durch einen Moderator angezeigt.
Baader H-alpha CMOS f/2 Highspeed 1.25" This 1.25-inch H-alpha filter is the 6.5 nm f/2 Highspeed version from Baader’s CMOS-optimised Precision Grade range. It isolates the H-alpha emission band for narrowband imaging, with the manufacturer’s wavelength reference at 656.3 nm.
Manufacturer model: Baader H-alpha CMOS f/2 Highspeed 1.25" · Specifications checked against manufacturer data on 2026-11-04
