TS-Optics M48 stainless-steel tuning ring — 0.5 mm This 0.5 mm stainless-steel ring provides fine spacing adjustment around an M48 × 0.75 filter/imaging thread.
Manufacturer model: TS-Optics M48 stainless-steel tuning ring — 0.5 mm · Specifications checked against manufacturer data on 2026-11-04
This 0.5 mm stainless-steel ring provides fine spacing adjustment around an M48 × 0.75 filter/imaging thread.
The manufacturer specifies a 49 mm internal diameter so the ring passes over the M48 male thread. It rests between the bearing faces; it is not a threaded extension tube.
Use individual thicknesses to tune camera-to-corrector separation or prevent a male thread from bottoming too far into an adjoining component. Keep sufficient thread engagement for the assembled load.
TS-Optics manufacturer documentation
Exact named TS manufacturer model and its published technical table checked. Unpublished dimensions, capacities and package items are not inferred.
Data sheet
Specific References
TS-Optics M48 stainless-steel tuning ring — 0.5 mm This 0.5 mm stainless-steel ring provides fine spacing adjustment around an M48 × 0.75 filter/imaging thread.
Manufacturer model: TS-Optics M48 stainless-steel tuning ring — 0.5 mm · Specifications checked against manufacturer data on 2026-11-04
