TEC 10×60 finder — short bracket kit The Baader Vario optical assembly is paired with TEC mounting hardware. For TEC focusers without a retaining ring. Choose the bracket to match the focuser hardware.
Manufacturer model: TEC 10×60 Short finder kit — 1353111 · Specifications checked against manufacturer data on 2026-11-04
The Baader Vario optical assembly is paired with TEC mounting hardware. For TEC focusers without a retaining ring. Choose the bracket to match the focuser hardware.
The supplied eyepiece provides illuminated aiming marks. Camera use requires suitable adapters and spacing; the TEC holder is a different assembly from Baader’s MQR-IV.
Baader optics manufacturer manual · Exact TEC kit identification
Baader makes the Vario optics used by TEC. Optical data comes from Baader's July 2024 manufacturer manual; exact short/long kit identity and retaining-ring compatibility come from Baader's specific TEC bundle listing, with TEC's own bracket documentation. This is explicitly combined manufacturer-component and official-bundle evidence, not a TEC-only kit datasheet. The supplied finder is 10×; 120× requires other eyepieces and a suitable diagonal. TEC's generic 114.3 mm travel is not used for the Vario component. The complete assembly mass and bracket offsets are not reliably established; the long listing's 0.93 kg conflicts with component weight information, so no assembly mass is claimed. MQR-IV hardware and specifications are excluded from this TEC-bracket kit.
| Bundle reference | 1353111 |
|---|---|
| Bracket version | Short |
| Mounting compatibility | For TEC focusers without a retaining ring |
| Clear aperture | 61 mm |
| Nominal f ratio | Approximately f/4.1 (250/61) |
| Supplied magnification | 10× with 25 mm eyepiece |
| True field | Approximately 4.5° |
| View | 45° erecting Amici prism |
| Eyepiece camera interfaces | T-2 and 1.25-inch |
| Sliding travel | 35 mm (Vario optical assembly) |
| Native backfocus | About 101 mm from base of T-2; objective/focuser retracted |
| Dewshield thread | M71 × 0.75 (Vario component) |
| Included mount | TEC base, knob, arm and finder holder |
| Mount arrangement | Spring-loaded retention; finder-body insert required |
Ficha técnica
TEC 10×60 finder — short bracket kit The Baader Vario optical assembly is paired with TEC mounting hardware. For TEC focusers without a retaining ring. Choose the bracket to match the focuser hardware.
Manufacturer model: TEC 10×60 Short finder kit — 1353111 · Specifications checked against manufacturer data on 2026-11-04
