Sky-Watcher 100 mm tube rings This pair of white aluminium rings secures a telescope tube with an outside diameter matching the rings’ 100 mm internal diameter. The measurement refers to the tube body, rather than the telescope’s optical aperture.
Manufacturer model: Tube rings 100 mm SW0193 · Specifications checked against manufacturer data on 2026-11-04
This pair of white aluminium rings secures a telescope tube with an outside diameter matching the rings’ 100 mm internal diameter. The measurement refers to the tube body, rather than the telescope’s optical aperture.
The lower attachment uses M6 × 1 fixings to connect the rings to a suitable dovetail or support. The upper photographic connection uses a 1/4-inch, 20-tpi thread. One ring has a removable piggyback camera adapter; the other provides a female photographic fixing.
The set includes two rings, two M6 screws and washers. A dovetail rail is separate. The seller lists compatibility with Sky-Watcher 80ED and 100ED tubes. Match the rail’s fixing pattern and use appropriate screw engagement.
Exact SW0193 seller reference used. Diameter 100 mm is retained; specifications for neighbouring 101 mm or 144 mm global models are not substituted. Ring width, mass and centre height are not published by the selected source.
| Internal diameter (mm) | 100 |
|---|---|
| Lower fixing thread | M6 × 1 |
| Upper fixing thread | 1/4"-20 photographic thread |
| Camera attachment | Removable piggyback camera adapter on one ring; female photographic fixing on the other |
| Included hardware | Two M6 screws and washers |
| Dovetail included | No |
| Listed applications | Sky-Watcher 80ED and 100ED tubes |
Ficha técnica
Sky-Watcher 100 mm tube rings This pair of white aluminium rings secures a telescope tube with an outside diameter matching the rings’ 100 mm internal diameter. The measurement refers to the tube body, rather than the telescope’s optical aperture.
Manufacturer model: Tube rings 100 mm SW0193 · Specifications checked against manufacturer data on 2026-11-04
