QHY600PH-M The QHY600PH-M is a cooled monochrome astronomy camera using SONY IMX455. The full-frame IMX455 sensor offers 61.17 megapixels on a 36 × 24 mm imaging area. Standard and extended-full-well readout modes provide different noise and charge-capacity characteristics. QHY lists greater than 51 ke standard and greater than 80 ke extended full well…
Manufacturer model: QHY600PH-M · Specifications checked against manufacturer data on 2026-11-03
The QHY600PH-M is a cooled monochrome astronomy camera using SONY IMX455. The full-frame IMX455 sensor offers 61.17 megapixels on a 36 × 24 mm imaging area. Standard and extended-full-well readout modes provide different noise and charge-capacity characteristics. QHY lists greater than 51 ke standard and greater than 80 ke extended full well for 1 × 1 sampling.
QHY’s published ADC specification is Native 16-bit (0-65535 greyscale) A/D. A 2 GB DDR3 image buffer supports downloads through USB 3.0. Monochrome capture supports separate luminance, RGB and narrowband filter exposures. Full-frame and region-of-interest rates depend on readout mode and output format; the table below preserves those conditions.
Manufacturer cooling specification: Dual Stage TEC cooler:; – Long exposures (> 1 second) typically -35℃ below ambient; – Short exposure (< 1second) high FPS, typically -30℃ below ambient（Test temperature +20℃）. Cooling reduces thermal signal during long exposures, and performance depends on ambient conditions and capture rate. The camera has the manufacturer-listed dew-control provisions shown in the table.
The listed interface is Support M54 or M48 (Combined with adapters ), with backfocus of 17.5 mm camera assembly plus 6 mm CAA = 23.5 mm. Add the optical contribution of the selected adapters, filter wheel and guider when planning the telescope connection.
Use an external 12 V supply before connecting the USB data cable. QHY’s operating guide specifies 11–13.8 V at the camera; cable voltage drop must be included in the power budget. Manufacturer power-supply guidance: regulated 12 V supply capable of at least 4 A; original supplied adapter preferred Install the matching QHY All-in-One driver/SDK and compatible capture software.
QHYCCD manufacturer documentation
Use the named-model manufacturer connection diagram and the backfocus reference for the selected adapter. Readout mode and output format affect frame rate, noise and full-well capacity.
| Body length (mm) | 142 |
|---|
Ficha técnica
QHY600PH-M The QHY600PH-M is a cooled monochrome astronomy camera using SONY IMX455. The full-frame IMX455 sensor offers 61.17 megapixels on a 36 × 24 mm imaging area. Standard and extended-full-well readout modes provide different noise and charge-capacity characteristics. QHY lists greater than 51 ke standard and greater than 80 ke extended full well…
Manufacturer model: QHY600PH-M · Specifications checked against manufacturer data on 2026-11-03
