Baader M68 Camera Tilt Adapter The Baader M68 tilter provides up to 1 degree of camera-plane adjustment to compensate for tilt in the imaging train. It is designed for the compatible Baader M68 system.
Manufacturer model: Baader M68 Camera Tilt Adapter · Specifications checked against manufacturer data on 2026-11-04
The Baader M68 tilter provides up to 1 degree of camera-plane adjustment to compensate for tilt in the imaging train. It is designed for the compatible Baader M68 system.
The exact manufacturer specification gives an optical length range of 9.50–10.25 mm and an outer diameter of 92 mm. Include this variable optical length in the camera-spacing budget when setting the tilter.
The camera side is M68 × 1 male. The telescope-side interface is M68 × 1 female. Tilt correction changes camera alignment; it does not replace setting the correct reducer or flattener backfocus.
Baader manufacturer documentation
Exact named tilter range is 9.50–10.25 mm with 0–1° adjustment. Catalogue optical-length buckets are not treated as the exact range. For M48, the manufacturer lists both internal and external lens-side provisions; no additional adapter package is inferred.
| Tilt adjustment range | 0–1° |
|---|---|
| Optical length range | 9.50–10.25 mm |
| Camera side | M68 × 1 male |
Data sheet
Specific References
Baader M68 Camera Tilt Adapter The Baader M68 tilter provides up to 1 degree of camera-plane adjustment to compensate for tilt in the imaging train. It is designed for the compatible Baader M68 system.
Manufacturer model: Baader M68 Camera Tilt Adapter · Specifications checked against manufacturer data on 2026-11-04
